Emergency Light With Torch Light Circuit Diagram | LED |
Parts List
| Component No: | Value |
| R1 | 1MΩ |
| R2 | 1kΩ |
| R3 | 1kΩ |
| C1 | 474kpf |
| C2 | 1000μf |
| D1 | IN4733 |
| D2 | IN4007 |
| D3 | LED |
| Q1 | BC558 |
| Bridge | IN4007 |
| B | 4.5 V |
| S1 | Push Button |
| V1 | 230VAC |
Showing posts with label led circuit. Show all posts
Showing posts with label led circuit. Show all posts
Emergency Light With Torch Light Circuit Diagram | LED |
Parts List
Running LED Circuit Diagram Using Transistor
Running LED Circuit Diagram Using Transistor
Parts List
| Component No: | Value |
| R5 | 1K |
| R6 | 10K |
| R7 | 1K |
| R8 | 10K |
| C3 | 100µF |
| C4 | 100µF |
| Q1 | BC548 |
| Q2 | BC548 |
| D1 TO D6 | LED |
Super Bright Led Flasher
Super Bright Led Flasher
This is a novel flasher circuit using a single driver transistor
that takes its flash-rate from a flashing LED. The flasher in the
photo is 3mm. An ordinary LED will not work. The flash rate cannot
be altered by the brightness of the high-bright white LED can be
adjusted by altering the 1k resistor across the 100u electrolytic to
4k7 or 10k. The 1k resistor discharges the 100u so that when the
transistor turns on, the charging current into the 100u illuminates
the white LED. If a 10k discharge resistor is used, the 100u is not
fully discharged and the LED does not flash as bright. All the parts
in the photo are in the same places as in the circuit diagram to
make it easy to see how the parts are connected.
Subscribe to:
Posts (Atom)
